Wilkerson F26 Instrukcja Użytkownika Pobierz pdf

Bowl guards are recommended for added protection of polycarbonate

bowls where chemical attack may occasionally occur.

WARNING

To avoid polycarbonate bowl rupture that can cause personal injury or

property damage, do not exceed bowl pressure or temperature ratings.

Polycarbonate bowls have a 150 PSIG pressure rating and a maximum

temperature rating of 125°F.

WARNING

To avoid unpredictable system behavior that can cause personal

injury and property damage:

• Disconnectelectricalsupply(whennecessary)beforeinstallation,

servicing, or conversion.

• Disconnectairsupplyanddepressurizeallairlinesconnected

to this product before installation, servicing, or conversion.

• Operate within the manufacturer’s specified pressure,

temperature, and other conditions listed in these instructions.

• Mediummustbemoisture-freeifambienttemperatureisbelow

freezing.

• Serviceaccordingtoprocedureslistedintheseinstructions.

• Installation,service,andconversionoftheseproductsmustbe

performed by knowledgeable personnel who understand how

pneumatic products are to be applied.

• After installation, servicing, or conversion, air and electrical

supplies(whennecessary)shouldbeconnectedandtheproduct

tested for proper function and leakage. If audible leakage is

present, or the product does not operate properly, do not put into

use.

• Warnings and specications on the product should not be

covered by paint, etc. If masking is not possible, contact your

local representative for replacement labels.

WARNING

FAILUREORIMPROPERSELECTIONOR IMPROPERUSE OF

THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR

RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND

PROPERTYDAMAGE.

This document and other information from The Company, its subsidiaries

and authorized distributors provide product and/or system options for

further investigation by users having technical expertise. It is important

that you analyze all aspects of your application, including consequences of

any failure and review the information concerning the product or systems

in the current product catalog. Due to the variety of operating conditions

and applications for these products or systems, the user, through its own

analysis and testing, is solely responsible for making the ﬁnal selection of

the products and systems and assuring that all performance, safety and

warning requirements of the application are met.

The products described herein, including without limitation, product

features, speciﬁcations, designs, availability and pricing, are subject to

change by The Company and its subsidiaries at any time without notice.

EXTRA COPIES OF THESE INSTRUCTIONS ARE AVAILABLE FOR

INCLUSIONINEQUIPMENT/MAINTENANCEMANUALSTHATUTILIZE

THESEPRODUCTS.CONTACTYOURLOCALREPRESENTATIVE.

Richland, MI 49083 Tel: (269) 629-5000

Installation & Service Instructions

83-849-000

FilterModelsF26with

VariationsandAccessories

ISSUED:July,2009

Supersedes:February,2006

Doc.#83849000,EN#090604,Rev.2

  CAUTION

Polycarbonate bowls, being transparent and tough, are ideal for use with

Filters and Lubricators. They are suitable for use in normal industrial

environments, but should not be located in areas where they could be

subjected to direct sunlight, an impact blow, nor temperatures outside

of the rated range. As with most plastics, some chemicals can cause

damage. Polycarbonate bowls should not be exposed to chlorinated

hydrocarbons, ketones, esters and certain alcohols. They should not be

used in air systems where compressors are lubricated with fire-resistant

fluids such as phosphate ester and diester types.

Metal bowls are recommended where ambient and/or media conditions

are not compatible with polycarbonate bowls. Metal bowls resist the

action of most such solvents, but should not be used where strong acids

or bases are present or in salt laden atmospheres. Consult the factory

for specific recommendations where these conditions exist.

TO CLEAN POLYCARBONATE BOWLS USE MILD SOAP AND

WATER ONLY!  DO NOT use cleansing agents such as acetone,

benzene, carbon tetrachloride, gasoline, toluene, etc., which are

damaging to this plastic.

INSTALLATION

1. Refer to Warnings & Cautions.

2. Install as close as possible to point where air is being used.

3. Install the unit with the air flowing through the body in the direction

indicated by arrow.

4. Install the same pipe-size unit as the pipeline in use. Avoid using

fittings, couplings, etc., that restrict air flow.

5. Do not install this unit on any application where the pressure drop will

exceed 20 psi.

6. A drain line with 3/8" or 10mm ID flexible tube may be attached to

drain port if desired.

7. Maximum inlet pressure and operating temperature ratings are:

transparent plastic bowls, 150 psig (10 bar) and 125°F (52°C); metal

bowls, 250 psig (17 bar) and 175°F (79°C).

8. Install unit in a vertical position.

MAINTENANCE

1. TO CLEAN BOWL OR REPLACE FILTER ELEMENT:

a. Depressurize unit.

b. Inspect and replace crazed, cracked, damaged or deteriorated

seals and bowls with original manufacturer’s approved seals and

bowls.

c. IF BOWL BECOMES DIRTY, replace it or clean it by wiping it

with a soft dry cloth.

2. IF UNIT HAS RIGID (FELT) FILTER ELEMENT, replace or clean it

periodically. Remove element and tap it on a hard surface. Use an air

gun to blow out residual dirt.

3. IF UNIT HAS A OIL REMOVING CLOTH FILTER ELEMENT, replace

it with a new one every six months, or sooner if it becomes dirty or

causes pressure drop of 10 psi (0,7 bar) or more at rated flow.

4. IF METAL BOWL HAS A MANUAL PETCOCK, drain bowl at least

once per work shift.

5. BEFORE PLACING UNIT IN SERVICE, reinstall bowl and bowl guard

and lock them securely in place.

1 2

Podsumowanie treści

Strona 1 -   CAUTION

Bowl guards are recommended for added protection of polycarbonate bowls where chemical attack may occasionally occur.! WARNINGTo avoid polycarbonate b

Strona 2 - ACCESSORIES

FilterModelsF26withVariationsandAccessories 83-849-000REPAIRKITSANDREPLACEMENTPARTSFilter Element (Type A) and Bowl O-rin

Komentarze do niniejszej Instrukcji

Brak uwag

Wilkerson F26 Instrukcja Użytkownika

Przeglądaj online lub pobierz Instrukcja Użytkownika dla Sprzęt komputerowy Wilkerson F26. Wilkerson F26 User Manual Instrukcja obsługi

Podsumowanie treści

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy Wilkerson F26